The SCARA DRIVER II, is a product which combines the speed and accuracy of EPSON’s SCARA Robots with mounting, bearings and force/torque management for torqueing, screw driving, nut running and similar processes. There are few different models and all are intended to provide the flexibility of mounting most any driver manufacturers equipment. We are DEPRAG representatives so as it relates offering the SCARA DRIVER II with the driving equipment we can off a DEPRAG SCARA DRIVER II solution.

The original SCARA DRIVERs were designed and built back between 2008-2010; they have been in production since then running 2-3 shifts/day. The NEW SCARA DRIVER II is an optimization of the original Bridge design; its lighter, tighter with better torque and range of motion capability. There is also a Cantilevered design model which offers torque capability up to 40NM.

 

Schneider & Company
10503 Citation Drive #600
Brighton, MI 48116
(810) 360-0596
www.schneider-company.com
 

About SCARA DRIVER II

The SCARA DRIVER II, B-25 and B- 25L models are basic bridge mounts for an EPSON G10/G20 Robot. The design is well suited for taller, higher mounted and lighter screw driver equipment. The U axis (rotational) range of motion is +/- 120 degrees and the Z axis range is either 150mm or 300mm depending upon using either a long or short robot axis. The maximum torque for this tooling is 12NM from a tool weighing maximum of 4.5KG if using a G10 or 14KG if using a G20.

 

Schneider & Company
10503 Citation Drive #600
Brighton, MI 48116
(810) 360-0596
www.schneider-company.com
 

SCARA DRIVER II
B-25 and B- 25L

The SCARA DRIVER II, C-25 and C- 25L models are Cantilever mounts with the addition of a linear rail bearing for an EPSON G10/G20 Robot. The design is well suited for lower mounted and heavier screw driver equipment. The U axis (rotational) range of motion is +/- 110 degrees and the Z axis range is either 150mm or 375mm depending upon using either a long or short robot axis. The maximum torque for this tooling is 12NM from a tool weighing maximum of 6KG if using a G10 or 13.5KG if using a G20.

 

Schneider & Company
10503 Citation Drive #600
Brighton, MI 48116
(810) 360-0596
www.schneider-company.com
 

SCARA DRIVER II
C-25 and C- 25L

The SCARA DRIVER II, BRL-25 and BRL- 25L models are basic bridge mounts same mount as the B-25 and B25L but with an added bearing for supporting overhanging weight. This unit also has force management for protecting the robot from the process push load/torque load and is designed to be used on either an EPSON G10 or G20 Robot. The design is well suited for taller, higher mounted and heavier screw driver equipment. The U axis (rotational) range of motion is +/- 120 degrees and the Z axis range is either 150mm or 300mm depending upon using either a long or short robot axis. The maximum torque for this tooling is 20NM from a tool weighing maximum of 5KG if using a G10 or 11.5KG if using a G20.

 

Schneider & Company
10503 Citation Drive #600
Brighton, MI 48116
(810) 360-0596
www.schneider-company.com
 

SCARA DRIVER II
BRL-25 and BRL- 25L

The SCARA DRIVER II, CRL-25 and CRL- 25L models are Cantilever mounts with the addition of a linear rail bearing for an EPSON G10/G20 Robot. This unit also has force management for protecting the robot from the process push load/torque load. The design is well suited for lower mounted and heavier screw driver equipment. The U axis (rotational) range of motion is +/- 110 degrees and the Z axis range is either 150mm or 375mm depending upon using either a long or short robot axis. The maximum torque for this tooling is 40NM from a tool weighing maximum of 5KG if using a G10 or 10.5KG if using a G20.

 

Schneider & Company
10503 Citation Drive #600
Brighton, MI 48116
(810) 360-0596
www.schneider-company.com
 

SCARA DRIVER II
CRL-25 and CRL- 25L