
Please view the following slide shows to learn about what Eriez has to offer.









Smooth-faced and extended-pole models extend life of coolant, cutting tools, grinding wheels and pumps. Radial-design magnetic circuits extract ferrous particles to help meet tolerances and improve surface finish in grinding and metal-cutting operations
Flow rates up to 21 GPM (79 LPM).
This continuously rotating, smooth faced Permanent Magnetic Coolant Cleaner is used where little or no nonmagnetic material is mixed with the coolant. Powerful magnetic field reaches out & captures ferrous contamination in the fluid. Maximum flow achieved with water soluble coolant. As an EriezXpress item, the CS5-7 is ready to ship right now. Contact us for more details
Continuously Rotating Smooth-faced rolls are designed for use where little or no nonmagnetic material is contaminating the coolant.
Coolant is gravity fed under the magnetic roll. The roll's powerful permanent-magnetic field reaches out and captures ferrous contamination in the fluid.
For units with 8-inch diameter magnetic rolls, four models are available (21-inch (533 mm) to 70-inch (1778 mm) roll widths) with flow rates from 144 gpm (545 lpm) to 600 gpm (2,271 lpm).
Continuously rotating extended-pole models are designed for use where a relatively small amount of nonmagnetic material is contaminating the coolant.
Coolant is gravity fed to the Eriez cleaner where it flows under the magnetic roll. The roll's powerful permanent magnetic radial field reaches out and captures ferrous contamination, while allowing most of the coolant to drain back into the sump
Model IE indexing extended-pole Coolant Cleaners are used when both ferrous and non-ferrous contaminants are present.
The magnetic roll, under which the coolant flows, rotates intermittently. The magnetically attracted material builds up a mass of fine hair-like particles between the magnetic roll and the housing. This accumulation serves as a filter medium to entrap fine non-magnetic particles such as grinding wheel scale or other coolant contaminants
Model IS indexing smooth-faced coolant cleaners are available in a wide range of capacities for use with new or existing machines.
Designed for use with surface grinders, gear grinders, honing and lapping machines, and more. Wherever clean coolant is needed. Benefits include cleaner coolant with a longer service life & reduced machine downtime.
For units with 8-inch diameter magnetic rolls, four models are available (21-inch (533 mm) to 70-inch (1778 mm) roll widths) with flow rates from 95 gpm (360 lpm) to 317 gpm (1,200 lpm).
Model CE8 Magnetic Coolant Cleaners feature flow rates from 144 GPM (545 LPM) to 480 GPM (1,817 LPM).
Continuously Rotating Smooth-faced rolls are designed for use where little or no nonmagnetic material is contaminating the coolant. Coolant is gravity fed under the magnetic roll. The roll's powerful permanent-magnetic field reaches out and captures ferrous contamination in the fluid.
Since the roll surface is revolving against the current flow, large and small ferrous particles clinging tightly to its surface are carried upward out of the liquid. Coolant fluid drains back down into the hopper as ferrous particles are removed by the scraper blade.
Chips, grindings and other contaminats are scraped off the drum and deposited on the inclined scraper blades. That “swarf” builds up on the scraper blades and slowly moves to the discharge lip, which slopes down to a waiting receptacle
Model IE8 ontinuously rotating extended-pole Coolant Cleaners are designed for use where a relatively small amount of nonmagnetic material is contaminating the coolant.
The magnetic roll, under which the coolant flows, rotates intermittently. The magnetically attracted material builds up a mass of fine hair-like particles between the magnetic roll and the housing. This accumulation serves as a filter medium to entrap fine nonmagnetic particles such as grinding wheel scale and other coolant contaminants.
The mass of magnetically held materials accumulates until it restricts the passageway between the magnetic roll and the housing, causing coolant to back up into the sump. When the rising coolant level activates a pressure-type level switch; the magnetic roll is automatically indexed forward. This moves the packed filter plug from the restricted passageway and permits coolant to once more flow through the magnetic field.
The amount of roll movement can be adjusted within a range of 1/4 to 1-1/4 inches (6 to 32 mm). The frequency of movement is controlled by flow and feed conditions, so the Coolant Cleaner operates at maximum efficiency under varying conditions. A phosphor-bronze scraper blade removes the accumulation of fines from the magnetic roll at the discharge point
Permanent rare earth magnetic roll maximizes removal of fine ferrous particles.
Developed for metalworking and specialty industrial markets, Eriez' Xtractor extends the life of pumps, cutting tools, and grinding wheels by removal of fine, ferrous contaminants








Copyright Schneider & Company Inc. 2012 all rights reserved